返回主站|会员中心|保存桌面
普通会员

上海爱泽工业设备有限公司

工业控制领域内相关产品的代理分销及技术服务

新闻分类
  • 暂无分类
站内搜索
 
友情链接
首页 > 新闻中心 > VEGA VIB S61系列振动开关产品数据表
新闻中心
VEGA VIB S61系列振动开关产品数据表
发布时间:2017-10-16        浏览次数:33        返回列表
 
VEGA VIB S61系列振动开关产品数据表
VEGAVIB S 61 
Vibrating level switch for granulates 
  • Easy setup without adjustment 
  • Product-independent switching point 
  • Optimum rod design avoids buildup and jamming 
  • Easy cleaning 
  • Wear and maintenance free 
Function 
The vibrating rod of VEGAVIB is energized by a piezo crystal and it vibrates at a fixed amplitude. If the vibrating rod is covered by product, the amplitude change is detected by the integral electronics and converted into a switch signal. The switching condition is visible from outside via a two colour LED. No special adjustments are required to set up VEGAVIB S 61.
Area of application 
VEGAVIB S 61 is used as a level switch in free flowing powders, granulates and coarse grained solids and detects reliably and accurately when a point level is reached. The optimum rod design avoids jamming and buildup of bulk solid material. It is ideal as a high or low level switch in a vessel detecting foodstuffs, perishable or granulate materials,which could be retained in a fork solids level probe. 
Technical data
  Process pressure   -1…16 bar
Process temperature   -50…+150℃
Density  ≥ 100 g/l 
Material housing   plastic PBT 
Protection    IP 66/IP 67 
Materials, wetted parts   316L 
Approval    option: ATEX II 1/3 D IP6X T 
Electronics transistor (NPN/PNP) 
Load current    max. 400 mA 
Turn-on voltage   max. 55 V DC 
Supply voltage    10…55 V DC 
Power consumption   max. 0.5 W 
Electronics double relay (DPDT) 
Supply voltage    20…253 V AC, 50/60 Hz, 20…72 V DC 
Power consumption   1…8 VA (AC), approx. 1.3 W (DC) 
Turn-on voltage   min. 10 mV / max. 253 V AC/DC 
Switching current   min. 10 μA / max. 3 A AC, 1 A DC 
Breaking capacity   max. 750 VA, 54 W 
Accessories:Sliding lock fitting (extended versions) pressurised or unpressurised for adjustable switch point
VEGAVIB S 61
振动极限开关,用于颗粒状的固料
  • 安装方便, 无需调整
  • 产品独立开关点
  • 优化杆设计避免了堆积和干扰
  • 易清洗
功能
VEGAVIB 的振动杆由压电晶体激发, 并以固定振幅振动。如果振动杆被产品覆盖, 则通过整体电子学检测振幅变化并转换成开关信号。开关情况从外面是可看见的通过LED指示灯显示。设置 VEGAVIB S 61 不需要进行特殊调整。
应用领域
VEGAVIB S 61 在自由流动的粉末、颗粒和粗粒固体中被用作电平开关, 并在达到点水平时进行可靠和准确的检测。**杆设计避免了大块固体材料的干扰和堆积。它是理想的作为一个高或低电平开关的船舶检测食品, 易腐或粒材料, 这可以保留在一个叉子固体水平探头。
技术资料
工艺压力-1..。16酒吧
工艺温度-50... + 150℃
密度≥100克/升
材料外壳塑料 PBT
保护 ip 66/ip 67
材料, 湿部316L
批准选项: ATEX II 1/3 D IP6X T
 
 
电子晶体管 (NPN/PNP)
负载电流**值400 mA
开启电压**值55 V DC
电源电压 10…55 V DC
功耗**值0.5 W
电子双继电器 (双)
电源电压 20…253伏 AC, 50/60 赫兹, 20…72 V DC
功耗 1…8 VA (AC), 约 1.3 W (DC)
开启电压**小10毫伏/** 253 V 交/直流
开关电流**小 10 a/**值3 a AC, 1 DC
**破坏容量750 VA, 54 W
 
附件: 滑动锁配件 (扩展版) 加压或 unpressurised 可调开关点
以上即为VEGA VIB S61 6263的相关介绍,如有任何技术咨询或需要相关技术资料,请前往www.ize-industries.com相关页面进行下载。